Electronics: FTDI USB TO UART

Donations

Anything would help really. My goal is to have this website ad free and so you can enjoy my content without having to look at ads. Thank you

$1.00

 

 

TABLE OF CONTENTS

1. Introduction
2. Bill of Materials
3. Schematic
4. Oshpark
5. Final Thoughts
6. Download Original files

INTRODUCTION

With the Arduino mini, there is a need for a USB to UART controller to upload your sketches and this could also be used for the ESP8266.

This project is inspired and based off the Sparkfun’s FT231X breakout board design.  I’ve created this project because 1. I like designing and soldering electronics 2. Try to create a cheaper alternative to the popular FT232RL and also add 1 or 2 features to the current FT231X breakout board.

BILL OF MATERIALS

For the bill of materials, its pretty straight forward.  I’ve attached links to digikey for each component as I find them easier to order from but you could also get the parts from arrow or mouser as well.

 

 

Component Description Part number Quantity Link
47pF, 0603, 50V C1608C0G1H470J080AA 2 Digikey
0.1uF, 0603, 25V CGA3E2X7R1E104K080AA 4 Digikey
10uF, 0805, 6.3V TCJN106M006R0250 1 Digikey
Micro B Connector 10118192-0001LF 1 Digikey
6-pin Header M20-7910642R 1 Digikey
N-Channel FET BSS84-FDICT-ND 1 Digikey
27 ohm, 1206 RC1206JR-0727RL 2 Digikey
10k, 0603 RT0603DRD0710KL 2 Digikey
FT231X, SSOP-20 FT231XS-U 1 Digikey

SCHEMATIC

Below I’ve attached an image of the schematic but i’ve also attached the original kicad files and a PDF version of the schematic at the end of the post.

OSHPARK

If you feel like you want to get this board made, I’ve attached a link to my oshpark project.  With oshpark, I find they make great quality boards at a great price for small sized boards.

Order from OSH Park

FINAL THOUGHTS

I know this was a short post and project but I found it important to share another option for those’s who want to find a cheaper solution and want to learn along the way.  You can find a lot cheaper solutions on amazon that are china made but i’ve read stories in some cases that they were not genuine FT232RL ICs.  If you wish to build your own, its very easy and rewarding at the same time.

In the next revision I will add LEDS for TX and RX indication as for this version I eliminated to save some cost and space.

Hope you enjoyed this post, THANK YOU 🙂

DOWNLOAD ORIGINAL FILES

https://app.box.com/s/50ap9obq89ucydbqqn54tye6ae3xiu34

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s